Pigtails, Connectors & Adapters

The Lumenier Universal Antenna Adapter Kit allows you to upgrade your DJI Goggle 2 experience and improve your FPV performance.  Ea...

This is a replacement coaxial cable for the Caddx Vista system. These are available in 8cm, 12cm, 14cm, and 20cm. Be sure to choose the appropriate...

Upgrade the DJI Integra with the ORT Helical 6-Turn 5.8GHz Antenna. With a 6-Turn design, it boosts signal strength and extends signal range for FP...

The HOTA H24 is a GaN adapter that HOTA. It works well with laptop PCs and other devices, and can charge devices up to 5 times faster than traditio...

Revised version now includes a power switch and additional solder pads.The Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles fits s...

Flywoo A30 Connectors provide a strong and reliable connection up to 15A of continuous current. This set includes 5 MALE and 5 FEMALE con...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

Premium XT30 connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x XT30 C...

USB-C to XT60 power cable for use with Toolkit RC chargers. This cable will output up to 20V DC and up to 5 Amps, depending on the Type-C power sou...

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides...

A30 Connectors provide a strong and reliable connection up to 15A of continuous current.   Check out all our pigtails and connectors and our select...

Spare replacement lens for Walksnail Avatar Nano & Micro Cameras.Available in 9cm and 14cm. The 14cm includes a micro camera back case.  Check ...

DJI O3 Air Unit adapter mount is made by CNC Aluminum, it can dissipate heat from the O3 Air Unit at the same time provide a strong mounting soluti...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides...

Essentially, this adapter will allow you to connect RC Li-Po Batteries with XT60 Female Connectors to your Traxxas Vehicles that have Traxxas C...

Designed for the Flywoo Chasers \ Vampire-2, but can be used anywhere a micro USB is needed! Easily access limited spaces with a set of two 90° Mic...

This BetaFPV BT2.0 Adapter boosts charging efficiency, saving time and space, simplifying operations, and facilitating management. Don't miss out o...

Use these Lipo "pig tails" to connect your XT30 Lipo to your multi-rotor or other build. Kit includes: 4X 7cm (aprox. 3.75 inch) long 20 AWG silic...

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack ...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! This connector is commo...

The RadioMaster RP-SMA 90 Degree Adapter Set allows users to modify the RadioMaster GX12 Radio Controller's antenna setup using the SMA ports on th...

You must remove the nuts in the connector for it to work with the Volador line of frame kits. Using this connector as it ships will make for improp...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

The Flywoo XT30UP Black Pigtail Set provides a reliable and high-performance connection for power needs. This pair, in 18 or 20 AWG, ensures tight ...

Power your GoPro with your craft's LiPo, with this Type C to Balance Head Charging Cable for GoPro Hero 6/7/8! Check out the Rest of our iFlight pr...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! This adapter lets you attac...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! Check out all our pigtails,...

This cable was designed to be an extension for the DJI Air unit. The cable that attaches the 2 connectors is 50mm long. Includes 2 cabled extension...

The BT3.0 2S Whoop adpater Male BT3.0 to HX2.54 cable 5 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins...

This is the replacement cable wire harness for the Runcam Micro Swift 2 Camera. Check out the rest of our replacement camera parts and all our RunC...

Premium Amass XT60H connector for when the classic XT60 just won't cut it. The snap on cover for the wire side of the connector means no need for h...

The Flywoo XT60H 14AWG Pigtail Set provides a reliable and high-performance connection for power needs. This pair ensures tight connection for powe...

For those hard-to-reach DJI Air unit and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers tha...

This adapter will allow you to connect your Ph2.0 cables to you 1S battery checker.  Check out the rest of our pigtails, connectors and adapters! I...

The TBS Gorilla Top Mount Adapter is designed to sit atop any 4-in-1 ESC featuring a Gorilla mounting pattern. This mount adapter includes 20x20 (M...

Upgrade the DJI Integra with the ORT Helical 3-Turn 5.8GHz Antenna. With a 3-Turn design, it boosts signal strength and extends signal range for FP...

The MATEKSYS AP_Periph CAN RC Input Adapter Node is a compact module for integrating RC input with DroneCAN systems. Powered by the STM32L431 MCU w...

The MATEKSYS CAN-G474 enhances drone communication with its high-speed 5 Mbit/s CAN transceiver and STM32G474 MCU, built on ArduPilot's AP_Periph f...

While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) a...

With this TBS Crossfire Nano Rx 6CH PWM Adapter, you can enable connectivities with your servos via 6ch PWM. Check out the rest of out TBS Products...

CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter The Castle Creations Castle Link contains a proprietary interface adapter an...

Update your JR module to the latest revision. This unit contains the wifi module needed for CRSF communication with other devices and the TBS Cloud...

Type C 90° connector for the DJI FPV system or any other situation where you may need to plug a USB into and cannot fit. This unit is USB-C to USB-...

NewBeeDrone XT60 Female to XT30 Male adapter (2Pack) 16AWG 10CM

This cable was designed to be an extension for the DJI Air unit. The cable that attaches the 2 connectors is 50mm long. Includes 2 cabled extension...

This is a pack of 4 replacement 5 pin Mark3 Camera made with high-quality flexible Soft PVC  Material: Soft PVC To install, simply solder the new c...

This is a pack of 4 replacement 3 pin BeeEye Camera connectors made with high-quality flexible Soft PVC  Material: Soft PVC To install, simply sold...