FPV Drone Flight Controller Accessories

Light as a feather, this jacket is your go-to windbreaker for any outside adventure. Pack it in your travel bag and explore the outdoors protected ...

Need to add weight to your quad quickly and precisely? Stick these on.  Break off as many as you need to get your quad to spec Available in strips ...

These are for legends only. These legendary battery straps were introduced at the 2023 MultiGP International Open. They are a no-frills strap that ...

Actual print size may vary depending on t-shirt size chosen. Forget King's Landing - Ned's just livin' the dream, flying high in the FPV sky! You'l...

XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring

Servo (3-Wire Plug, for Brushless ESC Upgrade) for Blackzon Slyder

HRASXTF2604H, Hot Racing Axial SCX24 Brass Axle Weight (Use w/HRASXTF39W04) Hot Racing Axial SCX24 Brass Axle Weight are a must have option for th...

DYNC0029, Adapter: EC5 Device / EC3 Battery with 1.5" Wire, 12 AWG

ESC/Receiver (3-Wire), Smyter Genuine BlackZon kit spare part for quick repairs, correct maintenance, and precise fitting.

HRAAOR28M1, Hot Racing Arrma Limitless Steel Mod1 Light Weight Spool Gear (w/8mm Bore) (28T)This product was added to our catalog on December 16, 2021

HGLRC brings you a brand new and upgraded HGLRC LED Mini -（38mm). The HGLRC LED Mini (38mm) light bar can be connected directly, which is more conv...

HGLRC brings you a brand new and upgraded HGLRC LED Lite -（25mm). The HGLRC LED Lite (25mm) light bar can be connected directly, which is more conv...

5 Pack LED Silicone cable kit for EasyLED series PDB and LEDs These are 2 wire cables for power & ground only, making them ideal for non-addres...

This is the PDB for the new EasyLED series. Features 2-pin JST-SH connectors. This PDB comes with 5 ports, one for power, and 4 for LEDS to plug in...

Check out the FlyfishRC-M10QMC! It is small, fast positioning, easy-to-use GPS. It adopts 18x18mm RHCP ceramic patch antenna that provides excellen...

NewBeeDrone smallest OpenLager F411 gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and...

8x 5 volt addressable LEDs with connectors on each side. Input and Output. Connectors are sideways to make connections easier for tight spots.   Bu...

The Airbot OpenLager gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and finding issues...

Capacitors can make your FPV video signal cleaner, and your mini quad fly better. Grab one and solder it in today. This version comes with short le...

Tiny module with compass and barometer from Flywoo! If your FC board has a barometer, you need to disconnect the Baro SDA / SCL pad. Check out all ...

The RUSH BLADE Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and h...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

Spare replacement part for the ImpulseRC Apex. Custom wire harness to elegantly connect all Apex OSD electronics with minimal soldering. JST-SH 6Pi...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

Convert any frame to use a 20x20 stack or even use a 30x30 4n1 ESC and 20x20 FC with this new RDQ TPU Stack adapter! NOTE: On the bottom of the ada...

This set of 4 M2 silicone rubber vibration dampener gummies work great to help reduce flight controller vibrations on your quad. Also available in ...

Durable reliable steel bolts for those M2 builds. Check out the rest of our hardware! Specifications Dimensions: M2x25mm Material: Steel Include...

An assorted collection of Nylon hardware, is a necessity for all FPV pilots. The M3 Nylon Hex Male-Female Spacer Standoffs Screw Nut Assortment Ki...

Every OCD builder out there needs a way to hide all of those normal looking cables... so here you go!  3/8th of a inch to fit all of your normal mo...

The Flywoo GOKU GM10 Nano V3 Micro GPS with Compass (10th Gen) is the perfect choice for reliable navigation. This GPS weighs in at just 2.8g, and ...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

The latest Micro BEC from Matek. These thins are tiny! Great for adding powering your 5 or 9V accessories without adding any meaningful weight to y...

The Matek SAM-M10Q-5883 GNSS is a cutting-edge multi-constellation GNSS module featuring the advanced u-blox SAM-M10Q platform. It offers exception...

The newly upgraded BLITZ Mini M10 GPS V2 has arrived, offering faster and more stable satellite search with the 10th generation chipset. ...

A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short ...

Pair of Matek WS2812 RGB LED Strips. Check out all our LEDs  as well as the entire Matek selection! Specifications Voltage: 5V Size: 57x8mm Inclu...

Precision TBS branded GPS / Glonass module for Betaflight or Pixhawk. Specifications Chipset - ublox UBX-M8030 Flash memory for saving configurati...

LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop Po...

A great way to reduce the amount of unwanted noise that makes it to your gyro. When used properly, this is a simple way to make your quad fly bette...

The Matek AP_Periph DroneCAN Magnetometer RM3100, designated as CAN-L4-3100, is a high-grade magnetic sensor module for drones. Based on the precis...

The V3.1 version of the GOKU GM10 Nano GPS retains its extremely small size and adds a new plug. No soldering is required, making it plug-and-play ...

The Ethix D6 Pro AC200W/DC650W 15A Dual Charger supports 2 channels of 325W charging and features a highly optimized charging algorithm with an eff...

The Matek AP_Periph Drone CAN GNSS - M10-L4-3100 has a GPS, Compass, and Barometer! Ready for whatever your aircraft can throw at it! Check out our...